Direct answer
How do you convert feet to meters?
Multiply the length in feet by exactly 0.3048.
For example, 10 feet converts as follows:
10 x 0.3048 = 3.048
10 feet = 3.048 metersUnit relationship
Understanding feet and meters
The foot is used in the United States and in some other everyday measurement contexts. The meter is the base unit of length in the International System of Units.
The relationship between feet and meters is exact because one international foot is defined as exactly 0.3048 meter.
Formula
Feet-to-meters conversion formula
In this formula:
- m is the length in meters;
- ft is the length in feet;
- 0.3048 is the exact conversion factor.
Steps
How to convert feet to meters manually
- Write down the measurement in feet. Preserve any decimal or fractional portion.
- Multiply the foot value by 0.3048.
- Keep the full result during calculation.
- Round the final result as needed.
- Label the answer in meters.
Examples
Feet-to-meters examples
Convert 5 feet to meters
5 x 0.3048 = 1.524
5 feet = 1.524 metersConvert 6 feet to meters
6 x 0.3048 = 1.8288
6 feet = 1.8288 metersConvert 12 feet to meters
12 x 0.3048 = 3.6576
12 feet = 3.6576 metersConvert 25 feet to meters
25 x 0.3048 = 7.62
25 feet = 7.62 metersDecimals
How to convert decimal feet to meters
Multiply the complete decimal measurement by 0.3048. Do not round the foot value before conversion.
Example: convert 5.5 feet
5.5 x 0.3048 = 1.6764
5.5 feet = 1.6764 metersExample: convert 12.75 feet
12.75 x 0.3048 = 3.8862
12.75 feet = 3.8862 metersFractions
How to convert fractional feet to meters
Convert the fraction to a decimal and multiply the result by 0.3048.
Example: convert half a foot
1/2 foot = 0.5 foot
0.5 x 0.3048 = 0.1524
1/2 foot = 0.1524 meterExample: convert 5 1/2 feet
5 1/2 feet = 5.5 feet
5.5 x 0.3048 = 1.6764
5 1/2 feet = 1.6764 metersReference table
Feet-to-meters conversion table
| Feet | Meters |
|---|---|
| 1 ft | 0.3048 m |
| 2 ft | 0.6096 m |
| 3 ft | 0.9144 m |
| 4 ft | 1.2192 m |
| 5 ft | 1.524 m |
| 6 ft | 1.8288 m |
| 7 ft | 2.1336 m |
| 8 ft | 2.4384 m |
| 9 ft | 2.7432 m |
| 10 ft | 3.048 m |
| 12 ft | 3.6576 m |
| 15 ft | 4.572 m |
| 20 ft | 6.096 m |
| 25 ft | 7.62 m |
| 30 ft | 9.144 m |
| 50 ft | 15.24 m |
| 100 ft | 30.48 m |
Height
Converting height from feet to meters
Personal height is often written as separate feet and inches. Convert the inches to a fraction of a foot before applying the feet-to-meters factor.
Total feet = feet + inches / 12
Meters = total feet x 0.3048
Example: convert 5 feet 8 inches
8 / 12 = 0.6666667 foot
5 + 0.6666667 = 5.6666667 feet
5.6666667 x 0.3048 = approximately 1.7272 meters
5 feet 8 inches is approximately 1.73 metersEveryday measurements
Where feet-to-meters conversions are used
- personal height;
- room length and width;
- ceiling height;
- furniture dimensions;
- construction plans;
- property measurements;
- sports field dimensions;
- equipment specifications;
- travel and elevation information.
Estimation
How to estimate feet in meters
Multiply feet by 0.3 for a quick mental estimate.
20 feet x 0.3 = approximately 6 meters
Exact result: 6.096 meters
The shortcut is useful for a quick comparison, but use 0.3048 when accuracy matters.
Precision
How many decimal places should be used?
The appropriate precision depends on the original measurement and its purpose.
- General comparisons may use two decimal places.
- Room dimensions may use two or three decimal places.
- Technical specifications may require more precision.
- The converted value should not imply greater measurement accuracy than the source.
Measurement type
Linear feet, square feet, and cubic feet
This converter changes linear feet into linear meters. It should not be used directly for square feet or cubic feet.
Area and volume conversions require squared or cubed conversion factors.
Common errors
Feet-to-meters mistakes to avoid
Dividing instead of multiplying
Convert feet to meters by multiplying by 0.3048.
Using 3.28 in the wrong direction
The factor 3.280839895 converts meters to feet, not feet to meters.
Dropping the decimal or fractional portion
A measurement such as 5.5 feet should not be treated as 5 feet.
Confusing feet and inches
A foot contains 12 inches. Decimal feet do not represent inches directly.
Using a linear conversion for area
Square feet require a square-foot-to-square-meter conversion.
Cluster guides
Related feet-to-meters guides
More converters
Continue using length converters
FAQs
Feet-to-meters frequently asked questions
How do you convert feet to meters?
Multiply feet by exactly 0.3048.
How many meters are in one foot?
One foot equals exactly 0.3048 meter.
How many meters are in 6 feet?
Six feet equal exactly 1.8288 meters.
Can I enter fractions into the converter?
Yes. It accepts fractions such as 1/2 and mixed values such as 5 1/2.
Does this convert square feet to square meters?
No. This converter is for linear measurements only.